New, replacement and shifting

Geyser Installation Services in Gurgaon

A geyser is only as safe as the way it is fitted. Whether you have bought a new geyser for a new flat, are replacing an old one, or moving it to another bathroom, Shiva Geyser Repair and Service installs it properly: strong mounting, a working safety valve, sealed connections and a checked power point.

  • Electric storage, instant and gas geysers
  • Wall, water and power point checked before fitting
  • Filled, test-run and leak-checked before handover
Geyser installation in Gurgaon, wall-mounted geyser above a washbasin
Tools used for geyser fitting

What we install

Our Geyser Installation Services

From a first geyser in a new flat to correcting one that was fitted badly, here is how we can help.

New geyser installation in a Gurgaon bathroom

New Geyser Installation

For new flats, renovated bathrooms or a first geyser. We fit it securely and connect it to the water line and a suitable power point.

  • Wall mounting and levelling
  • Safety valve and connections
Old geyser replacement in Gurgaon

Geyser Replacement

We safely remove the old geyser and install the new one, replacing worn connectors and valves rather than reusing them.

  • Drain and remove old unit
  • Fresh fittings where needed
Geyser shifting and reinstallation work

Uninstallation and Reinstallation

Moving house or renovating? We dismount your geyser, then reinstall it at the new location with proper connections.

  • Careful dismounting
  • Reinstallation and test run
Kitchen sink where an instant geyser is installed

Instant Geyser Installation

Compact geysers for kitchens and small bathrooms. Because they draw high power, we check the socket and wiring are suitable first.

  • Power point suitability check
  • Neat, close-to-tap fitting
Blue gas flame for gas geyser installation

Gas Geyser Installation

LPG and PNG gas geysers need good ventilation and leak-free connections. We advise on the safest placement before fitting.

  • Ventilation and flue check
  • Gas joints leak-tested
Correcting a badly fitted geyser connection

Installation Check and Correction

Geyser fitted by someone else and something feels wrong? We inspect the installation and correct missing valves, loose brackets or poor wiring.

  • Safety and earthing review
  • Fix what is not up to standard

Our installation checklist

What a Proper Geyser Installation Includes

A geyser can look fine on the wall and still be unsafe. These are the checks that separate a proper installation from a quick fitting.

  • Wall strength check

    A full tank is heavy. The wall and fasteners must carry it safely.

  • Level, secure mounting

    Fitted straight, with room left around it for servicing.

  • Pressure release valve

    Fitted on the inlet so excess pressure can escape safely.

  • Sealed connections

    Inlet and outlet joints properly sealed to prevent drips.

  • Power point and earthing

    A suitably rated socket with a working earth connection.

  • Isolation valve

    So water to the geyser can be shut off for future servicing.

  • Fill before power

    The tank is filled and air released before switching on.

  • Test run and leak check

    Heating confirmed and every joint checked before we leave.

Valves and pipe connections fitted during geyser installation
Technician fitting a water heater during geyser installation in Gurugram

How it works

Our Geyser Installation Process

Five clear steps from your first call to hot water in the bathroom.

  1. Share the details

    Call 072178 46577 and tell us the geyser type and capacity, where it is going, and whether water and power points already exist.

  2. Site check

    The technician checks the wall, water line, power point, space around the geyser and, for gas geysers, ventilation.

  3. Clear explanation

    You are told what the installation involves, any extra fittings needed and the cost, before work begins.

  4. Installation

    The geyser is mounted, the safety valve fitted, and the water and power connections made and sealed.

  5. Fill, test and hand over

    The tank is filled, the geyser test-run and every joint checked. We also show you where to switch off water and power.

Every type of geyser

Storage, Instant and Gas Geyser Installation

Each type has different installation needs. Knowing them avoids problems later.

Storage geyser installed on a bathroom wall
Electric storage

Storage Geyser Installation

The most common bathroom geyser. A full tank is heavy, so wall strength, the right fasteners and a working pressure release valve matter most.

Book storage geyser fitting
Tap connected to an instant geyser
Electric instant

Instant Geyser Installation

Light and compact, but high on wattage. It is best placed close to the tap it serves, on a socket and wiring rated for its load.

Book instant geyser fitting
Gas and water lines on a residential building
LPG and PNG

Gas Geyser Installation

Needs good ventilation, so it is safer outside a closed bathroom with the flue venting outdoors. All gas joints are leak-tested after fitting.

Gas geyser safety and repair
Power socket checked before installing an electric geyser

Good to know

Before Installation, and Mistakes We Often Correct

A little preparation makes the visit quicker. And if your geyser was fitted in a hurry, check it against the list on the right.

Keep ready for the visit

  • The geyser and the fittings kit that came with it
  • Clear access to the wall where it will go
  • A nearby switched power point, if one exists
  • Know where your main water valve is

Common installation mistakes

  • No pressure release valve, or a blocked one
  • Geyser fitted without a proper earth connection
  • Weak wall plugs or loose brackets
  • Switched on before the tank was filled
  • Gas geyser fitted inside a closed bathroom

Never switch on an electric geyser before it is full of water. An empty geyser can burn out its heating element very quickly.

Why homeowners choose us

Why Choose Us for Geyser Installation in Gurgaon

We repair geysers every day, so we know which installation shortcuts lead to breakdowns later, and we avoid them.

  • Repair know-how

    Installed with the eye of someone who sees what goes wrong with badly fitted geysers.

  • Local and nearby

    Based in Sector 82, near Vatika India Next, so follow-up help is close by.

  • Clear before we start

    Extra fittings and cost are explained before the installation begins.

  • Neat finish

    Tidy pipework, sealed joints and the area cleaned before we leave.

Local technician installing geyser pipework in a Gurgaon home
New residential towers in Gurugram where geysers are installed
Aerial view of Gurugram

Service areas

Geyser Installation Near You in Gurugram

Moved into a new flat in New Gurgaon or along the Dwarka Expressway? If you are searching for "geyser installation near me", we install geysers in Sector 82 and nearby residential areas. Call with your sector or society to book.

  • Sector 82
  • Sector 81
  • Sector 83
  • Sector 84
  • Sector 85
  • New Gurgaon
  • Manesar
  • Dwarka Expressway area

Service availability may vary by location.

Questions

Geyser Installation FAQs

What people usually ask before booking a geyser installation in Gurgaon.

Pipe fittings used in geyser installation

How much does geyser installation cost in Gurgaon?

It depends on the geyser type, the wall, and whether new water or power points and extra fittings are needed. Our technician checks the site and explains the cost before starting any work.

How long does geyser installation take?

A standard installation where water and power points already exist can usually be completed in a single visit. Extra plumbing or electrical work can take longer.

Do I need to buy the geyser before booking installation?

Usually you buy the geyser of your choice and we install it. If you are unsure which type or capacity suits your bathroom, ask us before buying.

Can you shift my geyser to a new home or bathroom?

Yes. We dismount your existing geyser and reinstall it at the new location, replacing connectors or valves where needed.

Do you install gas geysers?

Yes. We install LPG and PNG gas geysers. Because they need good ventilation, we advise on the safest placement and leak-test all gas joints after fitting.

Why must a geyser be filled before it is switched on?

An electric geyser's heating element must be covered with water. Switching on an empty geyser can burn out the element very quickly, so the tank is filled and air released before the power is turned on.

Will a third-party installation affect my geyser's warranty?

Some manufacturers link warranty terms to installation by their authorised service network. Check your geyser's warranty card before booking, and ask us if you are unsure.

New Geyser? Get It Installed the Right Way.

Tell us the geyser type and where it is going. We will check the site, explain the installation and fit it safely.