New Geyser Installation
For new flats, renovated bathrooms or a first geyser. We fit it securely and connect it to the water line and a suitable power point.
- Wall mounting and levelling
- Safety valve and connections
Shop No. 95, 82, Near Vatika India Next, Sector 82, Gurugram, Haryana 122012
Find us on GoogleNew, replacement and shifting
A geyser is only as safe as the way it is fitted. Whether you have bought a new geyser for a new flat, are replacing an old one, or moving it to another bathroom, Shiva Geyser Repair and Service installs it properly: strong mounting, a working safety valve, sealed connections and a checked power point.
What we install
From a first geyser in a new flat to correcting one that was fitted badly, here is how we can help.
For new flats, renovated bathrooms or a first geyser. We fit it securely and connect it to the water line and a suitable power point.
We safely remove the old geyser and install the new one, replacing worn connectors and valves rather than reusing them.
Moving house or renovating? We dismount your geyser, then reinstall it at the new location with proper connections.
Compact geysers for kitchens and small bathrooms. Because they draw high power, we check the socket and wiring are suitable first.
LPG and PNG gas geysers need good ventilation and leak-free connections. We advise on the safest placement before fitting.
Geyser fitted by someone else and something feels wrong? We inspect the installation and correct missing valves, loose brackets or poor wiring.
Our installation checklist
A geyser can look fine on the wall and still be unsafe. These are the checks that separate a proper installation from a quick fitting.
A full tank is heavy. The wall and fasteners must carry it safely.
Fitted straight, with room left around it for servicing.
Fitted on the inlet so excess pressure can escape safely.
Inlet and outlet joints properly sealed to prevent drips.
A suitably rated socket with a working earth connection.
So water to the geyser can be shut off for future servicing.
The tank is filled and air released before switching on.
Heating confirmed and every joint checked before we leave.
How it works
Five clear steps from your first call to hot water in the bathroom.
Call 072178 46577 and tell us the geyser type and capacity, where it is going, and whether water and power points already exist.
The technician checks the wall, water line, power point, space around the geyser and, for gas geysers, ventilation.
You are told what the installation involves, any extra fittings needed and the cost, before work begins.
The geyser is mounted, the safety valve fitted, and the water and power connections made and sealed.
The tank is filled, the geyser test-run and every joint checked. We also show you where to switch off water and power.
Every type of geyser
Each type has different installation needs. Knowing them avoids problems later.
The most common bathroom geyser. A full tank is heavy, so wall strength, the right fasteners and a working pressure release valve matter most.
Book storage geyser fittingLight and compact, but high on wattage. It is best placed close to the tap it serves, on a socket and wiring rated for its load.
Book instant geyser fittingNeeds good ventilation, so it is safer outside a closed bathroom with the flue venting outdoors. All gas joints are leak-tested after fitting.
Gas geyser safety and repairGood to know
A little preparation makes the visit quicker. And if your geyser was fitted in a hurry, check it against the list on the right.
Never switch on an electric geyser before it is full of water. An empty geyser can burn out its heating element very quickly.
Why homeowners choose us
We repair geysers every day, so we know which installation shortcuts lead to breakdowns later, and we avoid them.
Installed with the eye of someone who sees what goes wrong with badly fitted geysers.
Based in Sector 82, near Vatika India Next, so follow-up help is close by.
Extra fittings and cost are explained before the installation begins.
Tidy pipework, sealed joints and the area cleaned before we leave.
Service areas
Moved into a new flat in New Gurgaon or along the Dwarka Expressway? If you are searching for "geyser installation near me", we install geysers in Sector 82 and nearby residential areas. Call with your sector or society to book.
Service availability may vary by location.
Questions
What people usually ask before booking a geyser installation in Gurgaon.
It depends on the geyser type, the wall, and whether new water or power points and extra fittings are needed. Our technician checks the site and explains the cost before starting any work.
A standard installation where water and power points already exist can usually be completed in a single visit. Extra plumbing or electrical work can take longer.
Usually you buy the geyser of your choice and we install it. If you are unsure which type or capacity suits your bathroom, ask us before buying.
Yes. We dismount your existing geyser and reinstall it at the new location, replacing connectors or valves where needed.
Yes. We install LPG and PNG gas geysers. Because they need good ventilation, we advise on the safest placement and leak-test all gas joints after fitting.
An electric geyser's heating element must be covered with water. Switching on an empty geyser can burn out the element very quickly, so the tank is filled and air released before the power is turned on.
Some manufacturers link warranty terms to installation by their authorised service network. Check your geyser's warranty card before booking, and ask us if you are unsure.
Tell us the geyser type and where it is going. We will check the site, explain the installation and fit it safely.